Delivery Delays Due to COVID-19

Digital Car Circuit Scanner Diagnostic Tool

Low in Stock

Get Results, or Get Your Money Back. Guaranteed.




This instrument is designed to identify and trace wires or cables without damaging the insulation.

You can also use it in checking for short circuits and locating open circuits and so on. There are Sender and Receiver functions included in the instrument.

 

FEATURES

✅Tracing of wires is made possible even inside bundles, conduits, behind  panels, under carpets, upholstery, etc

 Easy to use: Simply connect the transmitter in series with the circuit or wire  under test, (i.e.: in place of a blown fuse, across a connector, in series with  an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the  tracers flexible probe to find the trouble spot

 42 V Ready: for use in the new generation of vehicles with mixed or single 42  Volt systems

✅ Operates on DC voltages from 6 to 42 volts

 Internally protected against power surges and overloads

✅ 7" flexible probe allows reaching wires in congested places

✅ Transmitter and Receiver LEDs show open or short circuit conditions 

 Adjustable sensitivity for all tracing situations

✅ No wire piercing required, non-contact technology!

✅ Batteries not included

 



Will this detect through the wiring harness covering?

- The answer is YES. This instrument is designed to identify and trace wires or cables without damage the insulation/coving. You can also use it in checking for short circuit and locating open circuits.

Can this be used to trace car and home power wires? of course using it on non live powered wires?

- Yes, it can be used to trace car and home power wire, but it needs to disconnect the power to the wire to be checked and remove all the load from the wire.

How do you use the short circuit wire tracker?

- You attach the red alligator clip to the car battery positive post. You attach the black alligator clip to the wire you want to trace. hold the wand (transmitter) tip as close to the wire as you can get. Move the wand along the wire while you listen to the receiver's tone (or static). Continuously adjust the sensitivity as you move the receiver tip along the wire. It takes no practice at all to get the sensitivity set at the right amount. You may need to open the wire bundle to get the receiver probe tip close enough to the wire you are tracing.



Money Back Guarantee Money Back
Guarantee
Free Shipping Now Shipping
Worldwide
Amazon Rainforest Next Day Processing
Available




This instrument is designed to identify and trace wires or cables without damaging the insulation.

You can also use it in checking for short circuits and locating open circuits and so on. There are Sender and Receiver functions included in the instrument.

 

FEATURES

✅Tracing of wires is made possible even inside bundles, conduits, behind  panels, under carpets, upholstery, etc

 Easy to use: Simply connect the transmitter in series with the circuit or wire  under test, (i.e.: in place of a blown fuse, across a connector, in series with  an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the  tracers flexible probe to find the trouble spot

 42 V Ready: for use in the new generation of vehicles with mixed or single 42  Volt systems

✅ Operates on DC voltages from 6 to 42 volts

 Internally protected against power surges and overloads

✅ 7" flexible probe allows reaching wires in congested places

✅ Transmitter and Receiver LEDs show open or short circuit conditions 

 Adjustable sensitivity for all tracing situations

✅ No wire piercing required, non-contact technology!

✅ Batteries not included

 



Will this detect through the wiring harness covering?

- The answer is YES. This instrument is designed to identify and trace wires or cables without damage the insulation/coving. You can also use it in checking for short circuit and locating open circuits.

Can this be used to trace car and home power wires? of course using it on non live powered wires?

- Yes, it can be used to trace car and home power wire, but it needs to disconnect the power to the wire to be checked and remove all the load from the wire.

How do you use the short circuit wire tracker?

- You attach the red alligator clip to the car battery positive post. You attach the black alligator clip to the wire you want to trace. hold the wand (transmitter) tip as close to the wire as you can get. Move the wand along the wire while you listen to the receiver's tone (or static). Continuously adjust the sensitivity as you move the receiver tip along the wire. It takes no practice at all to get the sensitivity set at the right amount. You may need to open the wire bundle to get the receiver probe tip close enough to the wire you are tracing.



Exfoliate. Mask. Moisturize

And get 10% OFF your next order.

Plus you'll hear first about secret discounts, new products and more!

(we don't spam)